|
|
|
Power cord with a standard Nema plug. Use for 120V spa controls.
|
Available in single or dual speed 1.5hp to 4hp and 110V and 220V.
|
|
1hp 110V air blower plugs into Nu-Wave pack
|
single pole, double throw air switch or a double pole, double throw air switch for Nu-Wave Supreme Series
|
|
Waterway Plastics center discharge pump wetend assembled to a 48 frame A.O. Smith/ Magnetek 1 or 2-speed motor. Choose your Horsepower/Voltage below. This wet end uses only 1-1/2 inch plumbing. If you need union fittings choose as an option below.
|
Center Discharge pump wetend
|
|
ColorGlo Spa Light installs in place of the light bulb in your Hot Tub! 24 LED- Out of Stock
|
Stainless steel heater manifold complete with element and black split nut unions. Shown with white tailpieces that you can add as an option, choose 1-1/2" or 2".
|
|
heater element for Nu-Wave Spa Control
|
Waterway In-line filter with bypass valve
|
|
Use this cord to plug your pump into our spa controls. Order with spa control and save.
|
STANDARD 31/2 inch DIA. SPA LIGHT LENSE KIT- plastic only
|
|
Use this cord to plug your air blower into our spa control.
|
The Nu-1000 is a 120/240V convertible spa control panel with 15" heater, timeclock and light. Scroll down for more info and options.
|
|
This Spa Pack includes the Nu-1000 A-24 Series spa control with a 120V, 2-speed pump and a 1hp, 120V air blower. It includes pump and blower cords and a 120V power cord.
|
This Spa Pack includes the Nu-2000 A-24 Series spa control with a 240V, 2-speed pump and a 1hp, 120V air blower. It includes pump and blower cords.
|
|
Ozonator cord will connect your ozonator to our spa controls.
|
Delzone corona discharge 110V ozone generator will plug into your Nu-Wave Spa Control.
|
|
Waterway Top load pressure filter with bypass valve
|
Techmark topside command center can be used on the Nu-Wave Supreme Series
|
|
56 frame through bolt motors
|
The Nu-2000 is a 230V spa control panel with 15" heater and timeclock. Scroll down for more info and options.
|
|
Waterway Plastics side discharge pump wetend assembled to a 48 frame A.O. Smith/Magnetek 1 or 2-speed motor. Choose your Horsepower/Voltage below. This wet end uses only 1-1/2 inch plumbing. If you need union fittings choose as an option below.
|
side discharge wetend
|
|
bath tub wetend
|
Waterway Plastics hi-flo pump wetend assembled to a 48 frame A.O. Smith/Magnetek 1 or 2-speed motor. Choose your Horsepower/Voltage below. This wet end can use either 1-1/2 inch or 2 inch plumbing. If you need union fittings, choose as an option below.
|
|
off set discharge wet end
|
pressure switch for Nu-Wave Supreme Series
|
|
Waterway Plastics Executive pump wetend assembled to a 56 frame A.O. Smith/Magnetek 2-speed motor. Choose your Horsepower/Voltage below.This pump can use two, 2 inch unions, one for the intake and one for the discharge, or one 2-1/2 inch union for the intake with one, 2 inch union for the discharge plumbing. You must choose below.
|
Waterway Executive wetend for 56 frame motors. Use with 2" or 2-1/2" pipe size.
|
|
filter mount base for top load pressure filter (base only- shown with pressure filter)
|
replacement filter cartridge for the Top Load Pressure filter and the In-line filter
|
|
timeclock for Nu-Wave Supreme Series
|
Waterway's Tiny Might circulation pump. Available in 110V or 220V. Choose voltage below when ordering. Also, union fittings available in 1" socket or 1" barbed (scroll down page to view pictures).
|
|
GFI for Nu-1000 Supreme Series
|
Waterway's 48 frame, single-speed circulating pump.
|
|
High current GFI for NU-3000 Supreme Series
|
omron relay for Supreme Series
|
|
Single pole contactor
|
spa pack base
|
|
air button white
|
Double pole heater contactor
|
|
Hi limit for Supreme Series
|
Rocker switch for Supreme Series
|
|
12V replacement bulb for spa light
|
thermostat for Supreme Series
|
|
<a href="browseproducts/Index.html" target="_blank">Browse All Products</a> |
 |
|
| Ecommerce powered by MonsterCommerce shopping cart. |