GFCI for Nu-1000 Supreme Series Spa Control and others
|
Standard 3-1/2 inch diameter spa light lense kit- plastic only
|
Man Part No. 400-1940 3/4 inch barbed union for Waterway Tiny Might Circulation Pump
|
: OUT OF STOCK - No Longer Available
High current GFI for NU-3000 Supreme Series
|
Use this J&J mini pump cord to plug your pump into our spa control. Order with spa control and save.
|
omron relay for Supreme Series
|
Man Part No. 400-1970 1 inch barbed union for the Waterway Tiny Might Circulation Pump
|
2" Heater Split Nut with screws for stainless steel heater manifolds
|
Use this J&J mini cord to plug your air blower into our spa control.
|
|
Aquatemp Air Button, CL011 white
|
Double Pole heater contactor
HCC-2XT04AA
COIL 120 VAC 50/60 HZ
|
Heater Union Tailpiece, Available in 2" X 1-1/2" or 2" X 2" for Stainless Steel heater Manifold
|
2 inch O-Ring for heater Tailpiece
|
2 Button decal for Tecmark Command Center w/ display window
Part # 30215BM
|
2 Inch Heater Tailpiece Gasket for stainless steel heater manifold
|
Hi limit for Nu-Wave Spa Controls Supreme Series.
INVENSYS 275-3275-00 1/4 inch bulb, 36 inch capillary
Hydro Quip replacement Part No. 34-0030
|
Ozonator cord will connect your ozonator to our spa controls.
|
Rocker switch, Standard size. SPDT, 125V AC, 16A, 3-PIN Used for the Nu-wave Spa Controls Supreme Series and others.
|
3 Button decal for Tecmark Command Center w/ display window
Part # 30217BM
|
Power cord with a standard Nema plug. Use for 120V spa controls.
|
|
2 Inch Heater Tailpiece O-Ring Gasket for stainless steel heater manifold. Also used for the 2 inch Waterway Spa Pumps.
|
2-1/2 Inch Heater Tailpiece O-Ring Gasket for stainless steel heater manifold. Also used for the 2-1/2 inch Waterway Spa Pumps. Use for Waterway Viper and someExecutive pumps with 2-1/2 inch intake.
|
12V replacement bulb for spa light
|
Thermostat, 18" x 5/16" Bulb. Invenysis Appliance Controls / Eaton
Used for The Nu-wave Spa Controls Supreme Series and A-24
Also can be used for Hydro Quip and others
|
Waterway Air Check Valve with a 1/4 lb. Spring
1-1/2" Slip /2" Spigot X 1-1/2" Slip X 2" Spigot
Part No. 600-8140
|
Waterway Plastics Center Discharge Pump Impeller
Part No. 310-5140 1.5hp, Yellow mark on inside with letter "D" stamped. Use with older style Center Discharge wet end.
|
Waterway Plastics Center Discharge Pump Impeller
Part No. 310-5200 2hp, White mark on inside with letter "E" stamped. Use with older style Center Discharge wet end.
| |